6
SETUP INSTRUCTIONS
The following sections provide information about attaching the base to your
monitor and using the power cord and video cable.
Monitor Base
To install the monitor base, place the monitor on the base until it snaps into
place. To remove the monitor base, gently turn the monitor upside down and
press the four retention clips together to release the base. Pull the base
straight away from the monitor. (See Figure 1.)
Install Remove
Figure 1: Installing and Removing the Monitor Base
Power Cord
Before connecting your monitor’s power cord, read the guidelines below:
•
This monitor has an integrated universal power supply. It can operate in
either a 100/120 VAC or 220/240 VAC voltage area. (No user
adjustment is required.)
•
Make sure the power cord meets the specifications and requirements for
your area. The power cord included with your monitor is rated for
100/120 VAC.
Caution: If the AC outlet is not grounded (with three holes), install the
proper grounding adapter (not supplied).
