background image

 

 

5. Moving & Storage

 

5.1 Delivery Checks 

 

When taking delivery of a machine, ensure that the 
machine has been transported in the correct position. 
Carefully check the physical condition of the box for 
any signs of external damage. If there is evidence of 
damage, remove the packaging to ensure there is no 
damage to the contents of the skid. In case of 
damage, 

DO NOT accept the goods

 and 

immediately inform 

MP SYSTEMS.

 If you are unsure if 

there is damage to the contents and accept delivery, you 

must write “Damaged” on the 

delivery receipt

.  In the event of irregularities during transit, the freight company will bear 

the full responsibility for any damage suffered. 

5.2 Transport & Carriage

 

The machine must be transported in a vertical position, as shipped. The tank 

MUST BE 

EMPTY 

before moving. The CDR Series has been constructed to be moved by fork truck.  

The machine must be moved in such a way as to avoid the risk of damage.  Do not 
attempt to lift the machine with equipment that is inadequate or unsuitable, especially with 
equipment that is too small for overall weight of machine. Refer to 

Section 4.2. 

Mechanical Specifications

 for unit weight.  Only trained and licensed Fork Truck 

operators may transport this machine. 

MP SYSTEMS

 is not responsible for any damage 

caused by unauthorized use.  

 

 

WARNING: 

Do not transport machine with fluid in tank. 

 

5.3 Storage

 

The CDR Series must be stored in a cool and dry environment, avoiding 
all extreme conditions including freezing conditions. All coolant must be 
drained from machine before being stored. If utilizing water-based 
coolants, the system must be flushed before storage, please refer to the 
coolant manufacturer for correct flushing agent. Removing all coolant 
from the system will ensure coolant does not become contaminated while in the system. 
Contaminated coolant may lead to malfunctions.  

 

Not properly draining/flushing CDR Series before storage can lead to bacterial 
growth, which will contaminate any coolant it comes into contact with. 
Contaminated coolants effectiveness is also greatly reduced. 

Summary of Contents for CDR80














































Reviews: