3.
Intended Uses
The CDR is a proven effective solution for high volume, multiple shift machining
applications with a filtering conveyor. It provides constant, full flow coolant filtration to
catch and prevent fines from
accumulating in the machine’s coolant tank, where they
contaminate the entire coolant system and machining environment. This buildup
eventually takes away from valuable coolant volume and requires frequent cleanouts and
shutdowns.
The pump picks up the dirty coolant as it enters the tank after a conveyor and
pumps it through a carefully engineered hydro-cyclone configuration at 80 gallons per
minute. It then deposits a concentrated slurry into an easily cleanable settling tank below
and allows clean coolant to return to the machine tool tank. When the CDR settling tank is
full, simply scrape out the debris into a bucket or chip hopper without having to interrupt
production.
•
The CDR is designed for applications with the following criteria
o
High production, high volume machining
o
Running Multiple shifts
o
Has a filtering conveyor
o
Will have a debris/sludge buildup in coolant problem
•
Typical types of machines the CDR can benefit greatly
o
Horizontal Machining Centers
o
Vertical Machining Centers
o
Automated production lines
o
After filtering conveyors with a rating of 500μm or lower
