Moyer Diebel 601HTG, Manual

Page: 48 / 114

38
1. The chemical dispensing pumps are located on a center bracket behind the lower-front
access panel.
2. Each pump is equipped with 6 feet [1.8 m] of supply tubing, stiffener tubes, and strainers.
3. A RED label marked DETERGENT, a BLUE label marked RINSE-AID and a WHITE Label
marked SANITIZER identify the chemical lines.
4. The chemicals enter the wash tank compartment through a fitting located on the rear right-
hand side of the wash compartment.
Installation - Model 601LTG
Pumps and Injection Points - Detergent, Rinse-aid and Sanitizer
Dispensing Pumps - 601LTG
! VERY IMPORTANT !
ALWAYS USE A COMMERCIAL-GRADE NON-CHLORINATED DETERGENT.
PLACE THE CHEMICAL SUPPLY CONTAINERS AS CLOSE TO THE MACHINE AS POSSIBLE.
DO NOT ELEVATE THE CHEMICAL CONTAINERS ABOVE THE FINISHED FLOOR.
The chemical dispensing pick-up tubes are stowed at
the rear of the dishwasher.
On the 601LTG, chemicals enter the wash tank
through a fitting on the rear wall of the tank.
CHEMICAL
PICK-UP
TUBES
601LTG
DETERGENT
RINSE-AID
and
SANITIZER
INJECTION
POINT
! VERY IMPORTANT !
Contact a chemical supplier for detergent and rinse-aid chemicals. The chemical supplier
must adjust the chemical dispensing pumps for water hardness and food soil types.