Moyer Diebel 601HTG, Manual

Page: 35 / 114

25
Models 601HTG - Operation
Drain Mode
The dishwasher will enter the drain mode whenever the Power Switch is
pushed down to the OFF/DRAIN position.
1. Push the illuminated power switch down to the OFF DRAIN position.
The power switch light will go out.
2. The cycle light will illuminate and the machine will drain.
3. The machine, will flush, perform 3 short drain cycles and then drain completely.
4. The cycle light will go out indicating that the drain cycle is complete. Do not open
the door until the light goes out.
! VERY IMPORTANT !
Draining Problems Related To Improper Installation.
Problems with draining are often the result of improper installation. The drain hose
is looped and clamped as shown in the photo below and must not be changed.
The drain hose is looped and
clamped and must not be
changed. Altering the drain
hose routing may result in the
machine's inability to drain
or may cause the machine to
siphon the water out of the
machine.
START
OFF
DRAIN
ON
POWER