Moyer Diebel 601HTG, Manual

Page: 34 / 114

24
! ATTENTION !
DOOR LEFT OPEN DURING WASH CYCLE
If the dishwasher door is left open for more than 5 seconds during the normal wash mode, then
the dishwasher cycle will reset to the beginning of the normal wash cycle.
! ATTENTION !
RINSE SENTRY MODE WILL EXTEND WASH CYCLE TIME
In the event that the final rinse temperature has not reached 180-195ºF/82-91ºC after the
wash cycle, the rinse sentry will extend the wash cycle time until the booster reaches
180-195ºF/82-91ºC. If the proper temperature is not reached within 5 minutes, the machine
will leave the rinse sentry mode and complete the cycle.
601HTG Rinse Sentry Mode
Heavy Duty Wash Mode
Model 601HTG Only
This mode is used to wash heavily soiled items such as pots, pans and other wares that require
more washing time than the standard 90 second Normal Wash Mode.
The dishwasher will remain in the Heavy Duty Mode until the operator exits the mode or
a maximum of 15 minutes, whichever occurs first.
1. Load a dish rack into the dishwasher, close the door and press the START button.
2. The green in-cycle light will illuminate and the dishwasher will begin a normal wash cycle.
3. Wait 10 seconds for the detergent to enter the wash compartment before pressing the
button.
4. Press the button to place the dishwasher in the Heavy Duty Wash Mode.
5. The green light will illuminate indicating that the machine is in the Heavy Duty Mode.
6. The dishwasher will continue to wash for a maximum of 15 minutes unless the operator
presses the button again.
7. Press the Heavy Duty button. The green light will go out indicating the dishwasher has
returned to the Normal Wash Mode.
8. The dishwasher will finish the wash cycle and perform a final rinse of the wares.
HEAVY DUTY
DELIME
Press the Heavy Duty
button for heavily soiled wares.
Operation -
Model 601HTG