Moxa Technologies NPort User Manual Download Page 74

Page: 74 / 122

NPort Server User’s Manual

5-12

Modifying Mapping COM Names

If you like to choose other COM names different from what you have assigned
under Add Server Wizard, you may follow the steps below to accomplish it.

Change COM names of all ports on the server consecutively

Go to the server you like to modify
COM names.

Go to first port.

Go to toolbar and select Map Port.

Select the COM name of the port you
like to map to.

Check on the box for mapping COM
names consecutively.

Click OK to finish.

Change COM name of one port

Go to the server you like to modify
COM names.

Go to port you like to make change.

Go to toolbar and select Map Port.

Select the COM name of the port you
like to map to.

Check off the box for mapping COM
names.

Click OK to finish.

Summary of Contents for NPort



























































































































Search results

Summary of Contents for NPort

Reviews:

Related manuals for NPort

Brands by name

Popular brands

Moxa Technologies NPort, User Manual

Search results

Summary of Contents for NPort

Reviews:

Related manuals for NPort

Brands by name

Popular brands