Moxa Technologies NPort User Manual Download Page 33

Page: 33 / 122

Setting Up Single-Host 3-11

Modifying Mapping COM Names

If you like to choose other COM names different from what you have assigned at
Add Server Wizard, you may follow the steps below to accomplish it.

Change all COM names of all ports on the server

consecutively:

Go to the server you like to modify
COM names.

Go to first port.

Go to toolbar and select Map Port.

Select the COM name of the port you
like to map to.

Check on the box for adding COM
names consecutively.

Click OK to finish.

Change COM name of one port

Go to the server you like to modify
COM names.

Go to port you like to make change.

Go to toolbar and select Map Port.

Select the COM name of the port you
like to map to.

Click OK to finish.

Summary of Contents for NPort



























































































































Search results

Summary of Contents for NPort

Reviews:

Related manuals for NPort

Brands by name

Popular brands

Moxa Technologies NPort, User Manual

Search results

Summary of Contents for NPort

Reviews:

Related manuals for NPort

Brands by name

Popular brands