NPort W2150A-W4/W2250A-W4 Series User Manual
93
Configuration Import
The
Configuration Import
page is located under
Maintenance
in the
System Management
folder. This
is where you can load a previously saved or exported configuration. Select or browse for the configuration
file in the
Select configuration file
field. If you also wish to import the IP configuration (i.e., IP address,
netmask, and gateway), make sure that
Import all configurations including IP configurations
is
checked.
ATTENTION
You may import the existing configuration file of the NPort W2x50A Series to facilitate the process. Please
note:
1.
If your NPort W2x50A Series is configured as BOOTP of the IP configuration (Web console: under
Network Settings > Ethernet/Bridge Settings
), it will be DHCP instead.
2.
If your NPort W2x50A Series is configured as Ad-hoc Mode of the Network type (Web console: under
Network Settings > WLAN Settings > Profile
), it will be Infrastructure Mode.
3.
If your NPort W2x50A Series is configured less than 300 baudrate (Web console:
Serial Port
Settings > Communication Parameters
), it will be 300.
NOTE
The NPort W2x50A-W4 Series configuration file cannot be imported to the NPort W2x50A Series for use.
