NPort W2150A-W4/W2250A-W4 Series User Manual
43
6.
Web Console: Basic Settings
Overview
This chapter introduces the NPort web console and explains how to configure the basic settings.
The NPort can be configured from anywhere on the network through its web console. Simply point the
browser to the device server’s IP address to open the web console. Network settings, operation mode, and
other items can all be configured through the browser.
Navigating the Web Console
To open the web console, enter your device server’s IP address in the website address line. If you are
configuring the NPort for the first time over an Ethernet cable, you will use the default IP address,
192.168.126.254
.
There are two account types:
admin
and
user
. If you enter the system with
admin
account, you will have
the right to read and write. If you enter the system with
user
account, you will only have the right to read.
If prompted, enter the console password. The default password for both
admin
and
user
accounts is
moxa
. The password will be transmitted with MD5 encryption over the Ethernet.
ATTENTION
If you have forgotten the password, you can use the reset button to load factory defaults, but this will
erase all previous configuration information.
