NPort W2150A-W4/W2250A-W4 Series User Manual
16
4.
In your terminal emulator program, set the terminal type to
ANSI
or
VT100
. If you select
Dumb
Terminal
as the terminal type, some of the console functions—especially the “Monitor” function—may
not work properly.
5.
Hold the
grave accent
key (`) down and power up the NPort.
The continuous string of grave accent characters triggers the NPort to switch from data mode to console
mode.
6.
The serial console will open and will be functionally identical to the Telnet console. Please refer to the
Telnet console section for instructions on how to navigate the console and configure the IP settings.
