NPort W2150A-W4/W2250A-W4 Series User Manual
90
The
E-mail Alert
page is located under
Auto Warning Settings
in the
System Management
folder. This
is where you specify how and where e-mail is sent when e-mail is used for automatic notification of system
and serial port events.
ATTENTION
Consult your network administrator or ISP for the mail server settings to use for your network. If these
settings are not configured correctly, e-mail notification may not work properly.
Mail Server (SMTP)
Default
Options
free text (e.g., “192.168.3.3”)
Description
This field specifies the IP address of the mail server that will be used when sending
automatic warning e-mails. If the mail server requires authentication, select
My server
requires authentication
and enter the username and password.
From e-mail address
Default
Options
free text (e.g., “[email protected]”)
Description
This field specifies the e-mail address that will be listed in the e-mail’s
From
field.
To e-mail address 1 to 4
Default
Options
free text (e.g., “[email protected]”)
Description
These fields specify the destination e-mail address(es) for the automatic e-mail warnings.
SNMP Trap
The
SNMP Trap
page is located under
Auto Warning Settings
in the
System Management
folder. This
is where you specify the SNMP trap settings to use for automatic notification of system and serial port
events.
SNMP Trap Server IP
Default
Options
IP address (e.g., “192.168.5.5”)
Description
This field specifies the IP address of the SNMP trap server that will receive SNMP traps.
Trap Version
Default
v1
Options
v1, v2c
Description
This field specifies the SNMP trap version to use.
