Moxa Technologies NPort Server Pro, User Manual

Page: 63 / 168

5-18
NPort
Server Pro User’s Manual
.
Note: If you empty the access control list, then by default, only the connecting host’s IP
address is granted.
1. Select the Access Control tab.
2. The screen will show a list of ports, and two methods of adding permission.
.
Note: When adding access permission, you may either view the access control list by Port ,
or by IP address . These two approaches also apply to the procedure for adding new
hosts. The next two sections describe how to add hosts using both approaches.
Configuring Through View by IP
Using the view access control list by IP address option displays the access control list by listing server
IP addresses. It will be clear which IP addresses have been granted access to which ports, and which
IP addresses are allowed onto the server.
Adding Access Permission of One Host
If a particular host is permitted access to all ports on a specific server, we recommend that you
configure using the view access control list by IP address option.
1. Click on the Access Control tab, and then select the IP address option next to View
access control list by: