NPort 9000 Series CLI
Commands
2-41
2.2.75 ptp enable
Use the
ptp enable
command on the device server to enable the PTP operation. Use the
no
form of this
command to disable the PTP operation on the device server.
Commands
ptp enable
no ptp
Syntax
Description
ptp
Configure PTP
enable
Enable the ptp operation
Defaults
ptp is default disable
Permission
Admin group
Usage
Guidelines
Ethernet port interface can only be set when system PTP configure is enabled.
Examples
NPORT S9650I-16-2HV(config)# ptp enable
NPORT S9650I-16-2HV(config)# no ptp
NPORT S9650I-16-2HV(config-if)# ptp enable
NPORT S9650I-16-2HV(config-if)# no ptp
2.2.76 ptp mode
Use the
ptp mode
global configuration command on the device server to set the PTP operation mode.
Commands
ptp mode e2e-bc
ptp mode p2p-bc
ptp mode e2e-oc
ptp mode p2p-oc
Syntax
Description
ptp
Configure PTP
mode
Set the ptp operation mode
e2e-bc
ptp v2 end-to-end boundary clock mode, this mode can only be set when
time source is set to PTP.
p2p-bc
ptp v2 peer-to-peer boundary clock mode, this mode can only be set
when Time source is PTP.
e2e-oc
ptp v2 end-to-end ordinary clock mode, this mode can only be set when
time source not PTP.
p2p-oc
ptp v2 peer-to-peer ordinary clock mode, this mode can only be set
when time source not PTP.
Defaults
Default setting of ptp is mode
Permission
Admin group
Usage
Guidelines
N/A
Examples
NPORT S9650I-16-2HV(config)# ptp mode v2-e2e-bc
