NPort 9000 Series CLI
Commands
2-54
2.3.1.9
media cable-mode
Use the
media cable-mode
interface configuration command on the device server to enable the
medium-dependent interface crossover feature on the interface. Use the
no
form of this command to disable
Auto-MDIX.
Commands
media cable-mode [mdi | mdix | auto]
no media cable-mode
Syntax
Description
media
Select a media
cable-mode
Select cable mode
mdi
MDI
mdix
MDIX
auto
Auto select MDI/MDIX
Defaults
The default is auto
Permission
Admin group
Usage
Guidelines
N/A
Examples
NPort S9650I-16-2HV(config-if)# media cable-mode auto
NPort S9650I-16-2HV(config-if)# no media cable-mode
2.3.1.10 switchport access vlan
Use the
switchport access vlan
interface configuration command on the device server to configure a port as
a static-access or dynamic-access port. If the switchport mode is set to access, the port operates as a member
of the specified VLAN. If set to dynamic, the port starts discovery of VLAN assignment based on the incoming
packets it receives. Use the
no
form of this command to reset the access mode to the default VLAN for the
device server.
Commands
switchport access vlan
vlan-id
no switchport access vlan
Syntax
Description
switchport
Set switching mode characteristics
access
Set access mode characteristics of the interface
vlan
Set (default) pvid in access mode
vlan-id
1 to 4094
Defaults
vlan-id = 1
Permission
Admin group
Usage
Guidelines
You can only use this command mode for configuring normal-range VLANs, that is, VLAN IDs
1 to 4094.
Examples
NPort S9650I-16-2HV(config-if)# switchport access vlan 2
