NPort 9000 Series CLI
Commands
2-19
2.2.22 ntp remote-server
Use the
ntp remote-server
global configuration command on the device server to configure the remote NTP
server. Use the
no
form of this command to return to the default.
Commands
ntp remote-server
server-addr-1 [server-addr-2]
no ntp remote-server
Syntax
Description
ntp
Configure Network Time Protocol
remote-server
Configure NTP server for time query
server-addr-1
IP address or DNS name
server-addr-2
IP address or DNS name
Defaults
The default configuration contains one time server “time.nist.gov”
Permission
Admin group
Usage
Guidelines
N/A
Examples
NPort S9650I-16-2HV(config)# ntp remote-server 192.168.127.1
time.stdtime.gov.tw
2.2.23 ntp refresh-time
Use the
ntp refresh-time
global configuration command on the device server to configure the interval of each
NTP query. Use the
no
form of this command to return to the default.
Commands
ntp refresh-time
seconds
no ntp refresh-time
Syntax
Description
ntp
Configure Network Time Protocol
refresh-time
Configure NTP query intervals
seconds
1-9999 seconds
Defaults
Default query interval is 600 sec
Permission
Admin group
Usage
Guidelines
N/A
Examples
NPort S9650I-16-2HV(config)# ntp refresh-time 600
2.2.24 ntp server
Use the
ntp server
global configuration command on the device server to enable the device server as an NTP
server. Use the
no
form of this command to return to disable it.
Commands
ntp server
no ntp server
Syntax
Description
ntp
Configure Network Time Protocol
server
Enable NTP server
Defaults
Default is disabled
Permission
Admin group
Usage
Guidelines
N/A
Examples
NPort S9650I-16-2HV(config)# ntp server
