NPort 5200 Series User’s Manual
Web Console Configuration
5-31
Change Password
Input the “Old password” and “New password” to change the password. Leave the password boxes
blank to erase the password. Keep in mind that if the password is erased, then NPort 5200 will
not
have password protection.
ATTENTION
If you forget the password, the ONLY way to configure NPort 5200 is by using the Reset button
on NPort 5200’s casing to “Load Factory Default.”
Remember to export the configuration file using NPort Administrator when you finish the
configuration. By using the Import function of NPort Administrator, your configuration can be
re-loaded into NPort 5200 after using “Load Factory Default.” Refer to Chapter 6 for more
details about the Export and Import function.
Load Factory Default
Use this function to reset all of NPort 5200’s settings to the factory default values. Be aware that
previous settings will be lost.
