NPort 5200 Series User’s Manual
Choosing the Proper Operation Mode
4-5
Reverse Telnet Mode
Console management is commonly used upon Console/AUX or COM port of routers, switches,
and UPS. Rtelnet works the same as RAW mode that they only listen to one specific TCP port
after booting up, and wait for the host on the network to initiate the connection. The difference is
that the RAW mode does not provide conversion function of telnet protocol. If the connected
devices need to use CR/LF conversion function when controlling, then users have to choose
Rtelnet mode.
Disabled Mode
When Operation mode is set to Disabled, that particular port will be disabled. Check the “Apply the
above settings to all serial ports” to apply this setting to the other port.
