NPort 5200 Series User’s Manual
Web Console Configuration
5-2
Opening Your Browser
1.
Open your browser with the cookie function enabled. (To enable your browser for cookies,
right click on your desktop Internet Explorer icon, select Properties, click on the Security tab,
and then select the three Enable options as shown in the figure below.)
2.
Type
192.168.127.254
in the
Address
input box
(use the correct IP address if different
from the default), and then press
Enter
.
3.
Input the password if prompted. The password is transmitted with MD5 encryption over the
Ethernet. Note that you will not be prompted to enter the password if the NPort 5200 is not
password protected.
ATTENTION
If you use web browsers other than Explorer, remember to Enable the functions to “allow
cookies that are stored on your computer” or “allow per-session cookies.”
Note that NPort 5200 only uses cookies for “password” transmission.
