MD-124 HW Manual
On-screen Display and Display Configuration
B-15
Display-Setup-User Settings-Communication-Address
This is a feature for configuring a serial interface that is only available in
Full Menu
mode.
This menu item allows the user to set a UART address for device identification on an RS-485 or RS-422 serial
network.
Level adjust from 0-15 and reflects a unique ID number. Default is 0.
Display-Setup-User Settings-Splash Screen
This is only available in
Full Menu
mode.
This setting enables/disables the
Splash Screen Logo
when the unit is powered on, for as long as the display
controller is initalizing. The logo will disappear once the signal input appears on-screen. By factory default, the
splash shown is the Moxa logo. Please contact our customer support representatives for information on splash
screen customization.
Display Setup: Preset Defaults
Display-Setup-Load Default-Factory Default
This function will reset all settings to their factory defaults; for information on resetting the system to a set of saved
User Defaults
, pleases refer to
Display-Setup-Load Default-Load User Default
, below. All signal inputs and
image adjustments will be reset. This function may be used in cases where you suspect a display configuration is
causing system faults. It can also be used when trouble-shooting configurations to determine if the display is the
reason for an undesirable effect, or if the problem is originating in external equipment.
Press the right (
►
) button to activate. A confirmation dialog will appear. Use
↑
/
↓
to confirm.
Display-Setup-Load Default-Load User Default
This function will restore any
User Default
settings that have been previously saved (to learn how to save a
User
Default
configuration, see
Display-Setup-Load Default/Save User Default
, just below). If no
User Default
configuration is found, nothing will be re-configured. User defaults are custom display properties that have been
adjusted and saved by the user. This feature may be used when trouble-shooting configurations to determine if the
display is the cause of a faulty or undesirable effect, or if problems are originating in external equipment.
Press the right (
►
) button to activate. A confirmation dialog will appear. Use
↑
/
↓
to confirm.
Display-Setup-Load Default-Save User Default
This is only available in
Full Menu
mode.
This function will create and save a custom
User Default
configuration. A set of user defaults consists of the
device’s current set of display parameters as defined by the user via the
OSD Menu
. Saving a set of user-defined
defaults provides an alternative and completely independent configuration to the
Factory Default
. It is useful for
customers who want to specifically preset the
OSD Menu
according to a company’s networking or device policies
and specifications.
To learn how to restore a saved User Default configuration, please refer to
Display-Setup-Load Default/Load
User Default
, just above.
Press the right (
►
) button to activate. A confirmation dialog will appear. Use
↑
/
↓
to confirm.
Display-Setup-Direct Access (right/left arrow hotkeys)
This menu item allows the user to configure the right and left arrows to as “hotkeys” that directly access display
properties that users often find themselves fine-tuning, giving more convenient access to features that are
otherwise only accessible by navigating the
OSD Menu
in depth. Available assignment is
Brightness
,
PIP Size
,
