MD-124 HW Manual
On-screen Display and Display Configuration
B-7
OSD Menu Items Explained
The following section explains all possible image properties that the user can encounter or adjust. The menu location of
each item is described as a filetree path. Please review the
OSD Menu Map
earlier in this manual for an overview of the
menu file structure. Most parameters may be adjusted in real time, so you do not need to exit the OSD menu to check
results.
Note: For custom products and/or collaborative OSD software solutions, the menu properties listed here may deviate
slightly from the OSD menu that has shipped with your product.
Basic Image Properties
Display-Picture-Brightness
This is only available in
Full Menu
mode.
Electronically increase/decrease the overall brightness of the panel by adjusting the voltage level.
This applies to the Main Source signal.
Window overlays (PIP/PBP)
and the
OSD Menu
overlay will be
unaffacted.
Scale is from 0-255. 160 is the default.
Display-Picture-Contrast
This is only available in
Full Menu
mode.
This increases/decreases the overall contrast of the panel electronically by controlling the voltage level.
This applies to the Main Source signal.
Window overlays (PIP/PBP)
and the
OSD Menu
overlay will be
unaffected.
Scale is from 0-100. 50 is the default.
Display-Picture-Phase
This only applies to analog VGA/RGB signals. Can affect image quality.
This function will remove pixellation defects (particularly evident in black areas) that manifest as a vertical line from
top to bottom by fine tuning signal data sampling.
Scale is from 0-100. Default is relative to signal source.
Display-Picture-Frequency
This only applies to analog VGA/RGB signals.
This adjusts the horizontal frequency of the analog signal to improve visibility of the entire image. When it is
adjusted, you will notice that the image will appear to be stretched and might in some situations start to flicker/
scroll, at which point you must reverse the last adjustment to stop it from flickering/scrolling anymore. This function
can be used for older signals that are not automatically detected by the internal display controller.
Scale is from 0-200 steps. Default is relative to signal source.
Display-Picture-Sharpness
This increases/decreases the overall image sharpness. This affects the whole panel, and applies to all signal inputs
and window overlays (PIP/PBP). Use it to increase the visual quality of signals from possible older equipment or
electronically weak signals.
Scale is from 0-15 steps. 7 is default.
