MD-124 HW Manual
On-screen Display and Display Configuration
B-11
Composite signal sources may be used in this manner (i.e, as secondary input sources, or
Second Source
). To
implement this feature, please refer to the
Display-Source-PIP-xxxx
section, below.
When selected, a box icon (
█
) will indicate that the selected function has been activated.
Display-Picture-Adv Settings-Graphic Scaling-Auto
This is only available in
Full Menu
mode and only when analog
Composite/S-VHS
signals are configured as the
Main Source
.
With this selection, the display controller will automatically try to identify the aspect ratio of the incoming signal and
scale the source image to its proper aspect ratio, according to the best possible fit (i.e., for widest possible or tallest
possible display, according to whichever allows a complete display of the image with no loss of information). Since
this is an automatic and electronically intelligent function it may not work correctly with all signals. Users may be
forced to choose one of the other graphic scaling techniques above to get the correct/desired image appearance.
When selected, a box icon (
█
) will indicate that the selected function has been activated.
Display-Picture-Adv Settings-Horz Position
Adjust the horizontal (left-to-right) position of the entire display area across the panel. This applies only to the
Main
Source
signal. Please note that this function can move information in the image outside the visible display area, so
use with caution.
Scale is from 0-100. 50 is the default.
Display-Picture-Adv Settings-Vert Position
Move the vertical (up-and-down) position of the panel’s entire display area. This is only applied to the
Main Source
signal. Please note that this function can move image information outside the visible display area, so use caution.
Scale is from 0-100. 50 is the default.
Display-Picture-Adv Settings-RGB Calibrate
Warning!
The displayed image
MUST
be a black/white image! Color images displayed as a gray scale are
incompatible! If a gray scale image is used, the calibration will produce incorrect color values!
This is only available in
Full Menu
mode and when analog
VGA/RGB
signal are selected as the
Main Source
. This
function will automatically recalibrate the gain on the R(red), G(green), and B(blue) signals (also known as “color
intensity”) to a neutral, normalized level.
This function will override any previous color adjustments selected from the OSD menu, including Kelvin color
temperature settings. This adjustment only affects the
Main Source
signal.
Press the right (
►
) button to activate. A confirmation dialog will appear. Use
↑/ ↓ t o co n f i r m .
Swap Input Sources: Main to Second / Second to Main
Display-Picture-Swap Source
This function will only be available if
PIP/PBP
is on; to set this property, please refer
Display-Source-PIP-xxxx
and
Display-Source-PBP-xxx
, below.
This function swaps the source priority of the full screen and window overlay images, transferring the overlay image
into the
Main Source
priority, and the full screen (“
Main Source
”) image into the
Second Source
(PIP/PBP)
priority. It will transfer these images according to whatever signal inputs have been set as
Main Source
and
Second Source
.
Press the right (
►
) button to activate this function. The OSD menu will still be visible.
