MD-124 HW Manual
On-screen Display and Display Configuration
B-13
important information on the display must be visible at all times. A black border around the OSD menu layout will
always be black and is not affected by this adjustment.
Scale is from 0-100. 50 is the default.
Display-Setup-OSD Settings-OSD Horz Position
Moves the horizontal (left/right) position of the
OSD Menu
. The OSD can only be moved within the available display
area.
Scale is from 0-100. 100 is default.
Display-Setup-OSD Settings-OSD Vert Position
Move the vertical (left/right) position of the
OSD Menu
overlay. The OSD can only be moved within the available
display area.
Scale is from 0-100. 100 is default.
Display-Setup-OSD Settings-Full Menu
This is only available after the administrator password has been entered.
If the
Simplified
OSD mode is insufficient for your purposes, you may gain access to all possible display parameters
by following this procedure:
•
Press the right arrow (
►
) to activate this function
•
A data entry dialog will appear, with 3 digits shown, each defaulting to zero (
0 0 0)
.
•
To enable
Full Menu
mode, change the 3 digits to
158
, then
•
Press the right arrow (
►
) to confirm.
Now all menu functions will be accessible. When you power off the product, this setting will revert back to
Simplified
mode.
Note: To force the OSD Menu to always appear in full menu mode, you must first unlock the OSD Menu with the
procedure as described and then navigate the OSD menu to
Display-Setup-OSD Settings-OSD Mode-Full
where
you may activate the
Full Menu
setting as default.
Display-Setup-OSD Settings-OSD Mode-Simplified
Simplified Mode
is the factory default.
This setting only appears when the display is in
Full Menu
mode.
This selection forces the
OSD Menu
to always appear in
Simplified
Mode
(even after power shutdown of the unit).
This means that a lot of advanced functions will not be accessible from the OSD menu. Setting the OSD to simplified
mode is to prevent advanced changes to the display that could profoundly affect display functionality and/or image
quality. Only experienced and qualified personnel should access and change this setting.
When selected, a box icon (
█
) will indicate that the selected function has been activated.
Display-Setup-OSD Settings-OSD Mode-Full
This is only available in
Full Menu
mode.
Force the
OSD Menu
to always appear in
Full Menu
mode (even when powering on after a shutdown of the unit).
This means that all possible display functions will be accessible from the
OSD Menu
.
Only experienced and qualified personnel should access and change this setting.
When selected, a box icon (
█
) will indicate that the selected function has been activated.
