Industio
CI-132 Series User’s Manual
2-1
2
2
2
Hardware Installation
The
installation of the
Industio
CI-132 Series consists of hardware and software
installation. The hardware installation is detailed in this chapter. The next chapter
deals with the software installation for various operating systems.
The
Industio
CI-132 Series has the following default (factory) settings:
I/O address :
0x180
(Port 1),
0x188
(Port 2)
IRQ :
10
INT Vector :
0x1C0
CAP Jumper JP1:
Open
Interface Switch SW2: Port 1:
ON
(
RS-485
)
Port 2:
ON
(
RS-485
)
Data Mode Switch SW1: Port 1:
ON
(
Automatic Data Direction Control Mode
)
Port 2:
ON
(
Automatic Data Direction Control Mode
)
Termination Resistor Port 1 Jumper JP3:
Open
(
not used
)
Termination Resistor Port 2 Jumper JP4:
Open
(
not used
)
Industio CI-132 Series Board
Interface Switch
ON
1 2
ON
1 2
CAP Jumper
JP1
JP3
JP4
Termination Resistor Port 2 Jumper
Termination Resistor Port 1 Jumper
Data Mode Switch
SW2
SW1
