Hardware Installation
Industio
CI-132 Series User’s Manual
2-9
The following is the
8 times speed mapping list
for quick
reference purpose,
particularly for DOS driver
.
Normal Speed Spectrum
High Speed Spectrum
50 (bps)
400 (bps)
75
600
110
880
134.5
1076
150
1200
300
2400
600
4800
1200
9600
1800
14.4K
2400
19.2K
4800
38.4K
7200
57.6K
9600
76.8K
19.2K
153.6K
38.4K
307.2K
57.6K
460.8K
115.2K
921.6K
INT Vector
Enter the interrupt vector I/O address for all ports. I/O address
for interrupt vector is from 00000H to 0FFFFH. Interrupt vector
is one byte of I/O address, in which each bit is used to indicate
the occurrence of interrupt for corresponding port. To use
interrupt vector, type in the hardware interrupt vector I/O
address. If not using interrupt vector, type 0 or leave blank as
the interrupt vector.
There are two modes for the
Industio
CI-132 Series driver. One
is using interrupt vector, the other is not using interrupt vector.
Driver employing interrupt vector scheme is supposed to have
better performance than employing polling scheme.
5.
Press
F10
to save the configuration and exit the utility.
