DA-682A-DPP Hardware
Hardware Installation
2-8
Connecting USB Devices
The DA-682A-DPP embedded computer has four USB 2.0 ports, with two ports on the front panel and the other
two on the rear panel. All of the ports are UHCI, Rev 2.0 compliant and support Plug & Play and hot swapping.
These ports can be used to connect USB devices, such as a keyboard, mouse, USB flash disk, and USB CD-ROM.
In addition, both USB ports support system boot up, which can be activated by modifying the BIOS settings.
Refer to Chapter 3 “BIOS Setup” for the configuration process.
Gigabit LAN Ports
The DA-682A-DPP Basic System has 6 Gigabit LAN ports. When the cable is properly connected, the LEDs on
the RJ45 connectors will glow to indicate a connection.
Pin
10/100 Mbps
1000 Mbps
1
Tx+
TRD(0)+
2
Tx-
TRD(0)-
3
Rx+
TRD(1)+
4
---
TRD(2)+
5
---
TRD(2)-
6
Rx-
TRD(1)-
7
---
TRD(3)+
8
---
TRD(3)-
LED
Color
Description
Gigabit RJ45
Connector
Green
100 Mbps Ethernet mode
Yellow
1000 Mbps (Gigabit) Ethernet mode
Off
Not operating or 10 Mbps Ethernet mode
