DA-682A-DPP Hardware
Hardware Installation
2-9
The default IP addresses and netmasks of the Gigabit LAN ports are as follows:
Default IP Address Netmask
LAN 1
192.168.3.127
255.255.255.0
LAN 2
192.168.4.127
255.255.255.0
LAN 3
192.168.5.127
255.255.255.0
LAN 4
192.168.6.127
255.255.255.0
LAN 5
192.168.7.127
255.255.255.0
LAN 6
192.168.8.127
255.255.255.0
NOTE
The W7E models use DHCP for IP address assignment.
Upgrading the Memory Module
The DA-682A-DPP embedded computer supports one DDR3 1333/1066 SODIMM module with up to 8 GB
capacity. The computer is shipped with one DDR3 SDRAM memory module installed. To replace the SDRAM
memory module, follow these instructions:
1.
Disconnect the DA-682A-DPP from its power source.
2.
Unfasten the screws on the back of the computer, and then remove the upper cover.
3.
Find the location of the SDRAM memory socket.