AirWorks AWK-3131A
Web Console Configuration
3-44
bits needed to send a character is 10 bits, and the time required
to transfer one character is 8.3 ms, so the force transmit time
to be larger than 8.3 ms.
UDP Mode
UDP is similar to TCP but is faster and more
efficient. Data can be broadcast to or received
from multiple network hosts. However, UDP
does not support verification of data and would
not be suitable for applications where data
integrity is critical. It is ideal for message
display applications.
When
Mode
is set to
UDP
on a serial port’s
Operation Modes
page, you will be able to configure additional
settings such as
Destination address 1
through
4
,
Local listen port
, and
Packet length
.
Destination Address 1 to 4
Setting
Description
Factory Default
IP address range and
port (e.g.,
“192.168.1.1” to
“192.168.1.64” and
“4001”)
In UDP mode, you may specify up to 4 ranges of IP addresses
for the serial port to connect to. At least one destination range
must be provided.
The maximum selectable IP address range is 64 addresses.
However, you can enter multicast addresses in the Begin field,
in the form xxx.xxx.xxx.255. For example, enter
“192.127.168.255” to allow the AWK-1137C to broadcast UDP
packets.
Begin: Empty
End: Empty
Port: 4001
Local Listen Port
Setting
Description
Factory Default
