Moxa Technologies AirWorks AWK-1137C User Manual Download | Manualshive

Page: 45 / 113

background image

AirWorks AWK-3131A

Web Console Configuration

3-31

Mode

Along with the

Application

field, this field specifies the serial port’s operation mode, or how it will interact with

network devices. Depending on how the

Application

field is configured, different options are available for each

Mode

. And, depending on the mode that you configure, additional configuration settings will be displayed.

Setting

Description

Factory Default

Real COM

This serial port will operate in Real COM mode.

Real COM

RFC2217

This serial port will operate in RFC2217 mode.

TCP Server

This serial port will operate in TCP Server mode.

TCP Client

This serial port will operate in TCP Client mode.

UDP

This serial port will operate in UDP mode.

Real COM Mode

Real COM mode is designed to work with AWK
drivers that are installed on a network host. COM
drivers are provided for Windows systems, and TTY
drivers are provided for Linux and UNIX systems.
The driver establishes a transparent connection to
the attached serial device by mapping a local serial
port to the AWK-1137C serial port. Real COM mode
supports up to four simultaneous connections, so
multiple hosts can collect data from the attached
device at the same time.

ATTENTION

Real COM drivers are installed and configured through NPort/OnCell Windows Driver Manager.

Real COM mode allows you to continue using your serial communications software to access devices that are
now attached to your AWK-1137C. On the host, the AWK Real COM driver automatically intercepts data sent to
the COM port, packs it into a TCP/IP packet, and redirects it to the network. At the other end of the connection,
the AWK-1137C accepts the Ethernet frame, unpacks the TCP/IP packet, and sends the serial data to the
appropriate device.

ATTENTION

In Real COM mode, two hosts can have simultaneous access control over the AWK-1137C serial port.

«
...
43
44
45
46
47
...
»

Summary of Contents for AirWorks AWK-1137C


















































































































Reviews:

No comments

Related manuals for AirWorks AWK-1137C

Ray 3 Plus Client

Brand: Sun Microsystems Pages: 6

Brand: Farallon Pages: 26

Brand: Observint Pages: 11

SAFETank Series

Brand: Raidon Pages: 49

Wireless Mini PCI Module

Brand: E-Tech Pages: 42

Brand: Lancom Pages: 25

Brand: Kanguru Pages: 13

Brand: Xenya Pages: 189

Brand: B+B SmartWorx Pages: 52

ZyXEL ZyAIR B-120

Brand: ZyXEL Communications Pages: 20

Brand: Microchip Technology Pages: 9

Brand: Supermicro Pages: 131

Brand: Variscite Pages: 17

Brand: ZyXEL Communications Pages: 2

LL140 RGB Series

Brand: Corsair Pages: 30

Brand: ATTO Technology Pages: 2

Brand: Comelit Pages: 140

TigerSwitch 100 SMC6924VF

Brand: SMC Networks Pages: 174

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands