EN - 11
or Authorised Service Centre, which have
the necessary knowledge and equipment to
ensure that the work is carried out correctly,
maintaining the correct degree of safety and the
original operating conditions of the machine.
Any operations performed in unauthorised
centres or by unqualified persons will totally
invalidate the Warranty and all obligations
and responsibilities of the Manufacturer.
•
Only authorized service workshops can carry
out guaranteed repairs and maintenance.
•
The authorized service workshops
only use genuine spare parts. Genuine
spare parts and accessories have been
designed specifically for machines.
• Non-genuine spare parts and accessories are
not approved. Use of non-genuine spare parts
and accessories cause the warranty to expire.
12. WARRANTY COVERAGE
The warranty covers all material and
manufacturing defects. The user must
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover
damages caused by:
•
Failure to become familiar with the
documentation accompanying the machine.
• Carelessness.
•
Incorrect or prohibited use or assembly.
• Use of non-genuine spare parts.
• Use of accessories not supplied or
approved by the manufacturer.
The warranty does not cover:
•
Normal wear and tear of consumables, such
as wheels, blades, safety bolts and wires.
•
Normal wear and tear.
The purchaser is protected by his or her own
national legislation. The purchaser’s rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
13. MAINTENANCE TABLE
Intervention
Frequency
Notes
MACHINE
Check all fasteners
Before each use
par. 7.5
Safety checks/check controls
Before each use
par. 6.2
Check the fixing rods
Before each use
par 4.3, 4.4
Check the battery charge status
Before each use
*
Recharge the battery
After each use
par. 7.2.2
*
Cleaning the machine and the motor
After each use
par. 7.3
Cleaning and lubrication of the cutting means
After each use
par. 7.4
Checking for any damage to the machine. If
necessary, contact the authorised service centre.
After each use
-
Checking the cutting means
After each use
par. 8.1.1
Sharpening the cutting means
-
par. 8.1.2
**
Replacing the cutting-means
-
par. 8.1.3
**
* Refer to the battery/battery charger manual.
**
The operation must be carried out by your Dealer or a specialised Service Centre