Mountain Models Flashback
21
Positioning More Fuselage Braces
There are two more braces that you need to add to the interior of the fuselage. You will
need:
•
2 fuselage braces (Figure A)
!
Adding the fuselage braces
1.
Position the larger fuselage brace into the slot on the fuselage side, between bulkhead
F5 and F6, with the taper facing toward the tail.
2.
Position the smaller brace into the slot on the fuselage side, between bulkhead F6 and
F7, also with the taper facing aft.
3.
Making sure that everything is aligned and square, glue both the left and right
fuselage sides from bulkhead F4 to the very end of the tail.
4.
Making sure that the braces you just positioned are flush with the fuselage sides, glue
them into place.
Attaching the F1 Bulkhead
Next, you are going to attach the F1 bulkhead.
To do this, you will need:
•
1 Plywood bulkhead F1 (Figure O)
Larger brace
Smaller brace
