Moulinex DJAA 42, Instructions Manual

Page: 7 / 14

7
Safety information
- Keep the knife out of reach of children.
-
Check that your mains supply voltage
matches the voltage marked on the knife.
Use of an unsuitable power connection
invalidates the warranty.
Wiring instructions for U.K and Ireland
only :
APPLIANCES WITH FITTED PLUG
Important : For your convenience this
appliance is supplied complete with a plug
incorporating a 3 amp fuse.
In the event of replacing a fuse in the plug
supplied, a 3 amp fuse approved by ASTA to
BS1362 must be used.
If the socket outlets are not of the 13A BS 1363
type, and therefore do not accept the plug
connected to this appliance, cut off the plugif
moulded type or remove the plug if connected
by screw terminals.
When the plug is a moulded type and this is cut
off from the appliance, the connected wires
are a shock hazard. Do not under any
circumstances connect a cut off plug into the
electrical socket outlet. The cut off plug must
be disposed of in a safe manner that prevents
any form of connection.
If the fuse cover is detachable, never use the
plug with the cover omitted. Replacement
covers can be obtained from your service
agent.
Fit the appropriate plug according to the ins-
tructions in paragraph "Fitting a plug". With
alternative plugs a 5 amp fuse must be fitted
either in the plug or adaptor or at the main fuse
box.
APPLIANCES WITHOUT FITTED PLUG
FITTING A PLUG - IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
BLUE
: NEUTRAL
BROWN : LIVE
But the colours may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter ‘N’ or coloured black. The wire
which is coloured BROWN must be connected
to the terminal which is marked with the letter
‘L’ or coloured red.
This appliance is manufactured to conform to
the Low Voltage Electrical Equipment (Safety)
Regulations 1989 and is designed to comply
with BS 3456. It complies with the requirements
of the EEC Directive (89/336/EEC).
-
To prevent electrical hazards, damaged
power leads should always be replaced by
the manufacturer, its after-sales service or
a similarly qualified technician.
- Always keep the power lead well clear of the
blades when using the knife.
-
Keep the power lead away from hot surfaces.
- This appliance is designed for home use.
- Always unplug the appliance after use
and before cleaning.
. F
ITTING THE BLADES
- Fit the blades (A) with the appliance
unplugged. Place the blades in their safety
sleeve, teeth facing downward.
-
Holding the blades by the safety guards (B),
slide them gently into the appliance and push
until they lock into place (indicated by an
audible click).
-
Then carefully remove the safety sleeve.
Important: The blades are very sharp. Take
great care when handling them.
. O
PERATION
-
Plug in the appliance. Press the ‘On’ button
(D) with your thumb.
. B
LADE USE
- The all-purpose blades have been specially
designed for superior cutting performance,
and in particular for slicing food with a crust
or crispy exterior (e.g. bread, meat joints,
etc.).
-
Begin cutting the food firmly from the crust,
working from the top downward. Keep the
blades parallel to the cut surface.
- Never attempt to cut through bones.
. R
EMOVING THE BLADES
- Unplug the appliance. Press and hold the
blade release button (C), then slide out the
blades, holding them by the safety guards.
Important: The blades are very sharp.`
1
2
3
4