Motrona PS340, Operation Manual, Page: 7 / 43

Ps34001b_oi_e.doc / 19.11.15 Page 7 / 43
3 Introduction
The PS340/PS641 units have been designed for the special requirements of single-axis
positioning systems, under consideration of maximum performance and accuracy, with minimum
stress for all mechanical parts. Very short control cycles together with intelligent motion profiles
provide excellent performance under all operating conditions.
This unit is very easy to set up. All settings can be made either by keypad and display at the unit
or by PC, with use of the motrona operator software OS 6.0.
All relevant operational parameters and variables are accessible by RS232/RS485 interface. For
PROFIBUS applications, our PB251 gateway is available. Therefore the user has multiple
possibilities for remote control of all parameters via operator terminals, PC or PLC systems

This manual first provides all basic instructions for operation of model PS340

For operation of relays and thumbwheels with model PS641 see appendix

For PC setup our “OS 6.0” software is available on the CD included to delivery,
or on our homepage
www.motrona.com

For communication by PLC or IPC or by a remote operator terminal, please
observe the serial protocol details described in our separate manual “Serpro”.

PROFIBUS communication is possible with use of our gateway PB251.