7
FIXING THE GEARMOTOR UNIT
•
Close the gate again and ensure that the
gearmotor stroke does not reach its full
extension. If necessary, adjust through the
through slot found on the head bracket (see
Ref.1).
•
Open the gate, insert the pivot into the
hole of the head bracket and secure it with
washer and nut.
•
Insert the bushing on the head fitting
pivot.
•
Secure the rear part of the gearmotor with
screws, bushing (lubricated), washer and
nut on the tail bracket.
•
Move the door, insert the three-lobed key
and turn it clockwise to release the
gearmotor.
s
t
y
l
s
t
a
r
s
t
y
l
s
t
a
r
s
t
y
l
s
t
a
r
s
t
y
l
s
t
a
r
1
2
Ref.1
