12
-
FG00
70
3M
07
-
1
-
06
/2
01
7
ENGLISH
Preliminary works
⚠
The following illustrations are mere examples in that the space for fastening the operator and accessories varies depending on
the installation area. It is up to the
fi
tter, therefore, to choose the most suitable solution.
The
fi
gures below refer to a standard installation with gearmotor
fi
tted on the left and gate opening inward. Installing the
gearmotor on the right is symmetrical.
Warning! For outward opening gate leaves, follow the chapter titled "INSTALLING AND CONNECTING FOR OUTWARD OPENING".
Set up junction boxes
fi
tted with cable glands and corrugated conduits for the connections coming form the junction pit.
The number of tubes depends on the type of system and the accessories you are going to
fi
t.
Lay the electrical cables (see the
table on types of cables and minimum thicknesses
) by running them through the corrugated
conduits and junction boxes.
