32
-
FG00
70
3M
07
-
1
-
06
/2
01
7
ENGLISH
F37 M1 slow-down starting point
10
= 10% of gate travel /… /
25
= 25% of gate travel (
default
) /… /
60
= 60% of gate
travel
Adjustment as a percentage of total travel, of the beginning slow-down point of gearmotor M1 during opening.
This function only appears if the Encoder function is activated.
F38 M1 closing slow-down point
10
= 10% of gate travel /… /
25
= 25% of gate travel (
default
) /… /
60
= 60% of gate
travel
Adjustment as a percentage of total travel, of the beginning slow-down point of gearmotor M1 during closing.
This function only appears if the Encoder function is activated.
F39 M1 opening approach point
1
= 1% of gate travel /… /
5
= 5% of gate travel (
default
) /… /
10
= 10% of gate travel
Adjusting as a percentage of the total travel, the M1 motor's opening approach starting point.
This function only appears if the Encoder function is activated.
F40 M1 closing approach point
1
= 1% of gate travel /… /
5
= 5% of gate travel (
default
) /… /
10
= 10% of gate travel
Adjusting as a percentage of the total travel, the M1 motor's closing-approach starting point.
This function only appears if the Encoder function is activated.
F41 M2 motor's opening slow-down point
10
= 10% of gate travel /… /
25
= 25% of gate travel (
default
) /… /
60
= 60% of gate
travel
Adjusting as a percentage of the total travel, the M2 motor's opening slow-down starting point.
This function only appears if the Encoder function is activated.
F42 M2 motor's closing slow-down point
10
= 1% of gate travel /… /
25
= 25% of gate travel (
default
) /… /
60
= 60% of gate
travel
Adjusting as a percentage of the total travel, the M2 motor's closing slow-down starting point.
This function only appears if the Encoder function is activated.
F43 M2 motor's opening approach point
1
= 1% of gate travel /… /
5
= 5% of gate travel (
default
) /… /
10
= 10% of gate travel
Adjusting as a percentage of the total travel, of the M2 motor's opening approach starting point.
This function only appears if the Encoder function is activated.
F44 M2's closing approach point
1
= 1% of gate travel /… /
5
= 5% of gate travel (
default
) /… /
10
= 10% of gate travel
Adjusting as a percentage of the total travel, the M2 motor's closing approach starting point.
This function only appears if the Encoder function is activated
.
F45
Do not modify. Function unavailable.
