[email protected] www.motorvac.com
Getting to Know the TransTech IV+
3
Front Features
Control Panel
– All electronic operational functions are initiated at this
location. See Control panel features section.
Filler Port & Cap
– New ATF is poured into unit before service.
Pressure Gauge
– Indicates fluid flow through the unit when in Inline mode.
Right Side Features
Dipstick Adapter
– Manifold that is permanently attached to DIPSTICK
RETURN hose. The manifold allows the CLEAN FLUID hose to be attached
to it as well as connecting them to a common dipstick wand for the drain
and fill process
Dipstick Hanger
– Allows the DIPSTICK RETURN hose and adapter to be
stored safely.
Clean Fluid Hose
– Clean ATF is introduced to the vehicle through
this hose. For inline mode connect hose to vehicle, the direction is not
important. Dipstick mode.
Dipstick Return Hose
– Draws dirty ATF from the vehicles in Dipstick
Mode.
Left Side Features
Inline Return Hose
- Connect to vehicle for inline services. Direction is not
important for inline service
Waste Disposal Hose
- Is inserted into the shop’s fluid recycling container
or into a suitable container for proper disposal of used transmission fluid.
Disposal Hose Ball Valve
- Open manually before
EMPTY WASTE
button
is pushed.
