background image

Parts

Service Parts for the TRANSTECH IV+ Transmission System.

Please refer to the part numbers below when ordering parts for this unit.

 

Part #   

 

Description

 

 

010-0027 

 

Wheel (8 x 1.75)

010-1052 

 

Bottle for adaptor tray

011-0003 

 

Sorter rack for adapter tray

010-5004 

 

Hose bracket

010-5500 

 

Axle, Rear Wheels (½” x 20.875 lg.)

010-5602 

 

Adapter tray

010-6060 

 

Reservoir cap

010-6101 

 

Swivel caster with brake lock

040-0507 

 

Axle Bushing (Black Nylon)

040-0604 

 

Cap Nut (½” ID – Push 0n)

040-2200 

 

Threaded Standoff (for adapter box)

050-1000 

 

Screen filter inline ½”MPT. 

050-1928 

 

Filter for “Dirty” hose assembly.

200-0061 

 

Assembly Dipstick Tube 1/4” x 42” PTFE

200-0085 

 

Assembly Dipstick Tube 5/16” x 60” NYL

200-1101 

 

Assembly Adapter Dipstick W / Hose

200-1109 

 

Assembly Filter Dipstick Dirty Hose

200-1113 

 

Assembly Disposal Hose

200-1604 

 

Internal Light / LED type

200-3102 

 

Dipstick Wand Kit c/w 200-0061 & 200-0085

200-8612 

 

Disposal hose assembly

200-8650 

 

Assembly Check Valve Clean Pump TTIV

200-8665 

 

Output/Return hose assembly (2)

200-9001 

 

Pressure Gauge Assembly (0-160 psi.)

020-8043 

 

Harness, External Power

030-0055 

 

Ball Valve 1/4FNPT Brass Chrome Plated

ORDERING PARTS

Parts for the TransTech IV+ may be ordered by calling MotorVac Customer Service at 1.800.841.8810.  
Please have your part numbers ready.

www.motorvac.com
[email protected]

[email protected]     www.motorvac.com

20

Summary of Contents for 500-1125B

























Reviews: