[email protected] www.motorvac.com
Transmission Service Procedure
Inline Exchange
Warning:
It is not necessary to empty the waste tank before beginning an exchange. If beginning an
exchange with fluid in the waste tank ensure that there is less fluid in the clean tank than the remaining
capacity of the waste tank. Failure to do so will result in waste tank overflowing!
Connection to Vehicle
1. Connect appropriate adapters to vehicle transmission cooler lines.
2. Start the vehicle.
3. Observe pressure gauge and toggle flow direction switch between position A and B. Whichever position
has greater pressure is correct. Leave valve in that position for the entire service
7
Select position with
higher pressure
