10 Operation
130
Rev. 06/2021
4.
Insert the USB flash drive into your running EasyNO
ₓ
.
▸
After a few seconds, the standard EasyNO
ₓ
interface closes and the installer interface
opens.
5.
Available update packages are displayed in the
Package
column. If necessary, tap on the
Language
button to change the language. Under
Installed
the version of the respective pack-
age installed on the EasyNO
ₓ
is displayed, under
New
the version to which the respective
package in the EasyNO
ₓ
will be updated. As a rule, the suitable update packages are prese-
lected. To change the selection if needed, activate or deactivate the checkbox under
Select
for the respective packages. To install the selected packages, tap
Install
.
▸
The selected update packages are installed. After an installer update, the installation of
the remaining packages must be restarted by tapping the
Install
button.
▸
Certain update packages may require a restart of the EasyNO
ₓ
.
6.
After installing the desired update packages, exit the installer by tapping the
Quit
button
and remove the USB flash drive.
▸
You can now use the EasyNO
ₓ
with the new software.
Summary of Contents for EasyNOx
