9 Devices
124
Rev. 06/2021
9.2.2.2
Binary Outputs
The
Binary Outputs
button in the
Preferences
view of an added I/O communication module
opens the
Binary Outputs
view.
Note that changes in this view are not saved and applied by the I/O communication module until
you exit the view. Use the drop-down list to link the binary outputs of the I/O communication
module displayed in the
Ch.
(Channel) column to the following functions:
–
Not Used
The binary output is not linked to any function.
–
Error Output, Warning Output
The binary output of the respective I/O communication module is assigned to the binary out-
put
Error
or
Warning
of the EasyNO
ₓ
. If the binary outputs of the EasyNO
ₓ
are activated (see
Devices
ₓ
switches the assigned binary output of the I/O communi-
cation module if a corresponding monitoring function of the EasyNO
ₓ
requires it.
–
Cat. Temperature Error NOx1 / NOx2
If the respective NO
X
monitor of the EasyNO
ₓ
has detected a temperature error on the re-
spective engine at at least one of the configured exhaust gas temperature measuring points
near the catalytic converter, the EasyNO
ₓ
switches the assigned binary output of the I/O
communication module.
–
NO
X
Exceedance NOx1 / NOx2
If the provisional daily average of the nitrogen oxide concentration currently exceeds the
configured level limit of the engine monitored by the respective NO
X
monitor, the EasyNO
ₓ
switches the assigned binary output of the I/O communication module.
Summary of Contents for EasyNOx
