a`qSOMM=rëÉê=dìáÇÉ
17
CONNECTING YOUR DCT6200 TO A STANDARD DEFINITION STEREO TV AND MONO VCR
For the connections described below you will need the following cables:
RF (75 ohm)
(3: one supplied;
two extra)
Video
1
Connect an RF coaxial cable to the cable wall outlet and the
CABLE
IN
connector on the DCT6200.
2
Connect an RF coaxial cable to the
TO
TV
/
VCR
connector on the DCT6200 and the
CABLE
/
ANTENNA IN
connector on the VCR, as shown below.
3
Connect a video cable to the
VIDEO OUT
connector on the DCT6200 and the
INPUT VIDEO
connector on
the VCR:
Mono VCR
CABLE/
ANTENNA IN
INPUT
VIDEO
VIDEO S-VIDEO
AUDIO IN
VIDEO
R
IN
L
OUT
SPDIF
Y
Pb
Pr
AUDIO OUT
TO
TV/VCR
CABLE
IN
RF Coaxial Cable
Video Cable
4
Connect an RF coaxial cable to the
TO TV
connector on the VCR and the
CABLE
/
ANTENNA IN
connector
on the stereo TV:
Mono VCR
Stereo TV
TO TV
CABLE/
ANTENNA IN
RF Coaxial Cable
This video connection method doesn’t support high definition video. For more information, see
“Connecting your DCT6200 to an HDTV” on page 9.
After you have finished connecting your DCT6200, see “Setting Up Your New DCT6200 for Digital Cable
Services” on page 22.