28
Important Information About the 4:3 Override Feature
The 4:3 Override feature enables you to specify a different output mode for high-definition (YPbPr)
programming and standard definition (4:3) programming. If the 4:3 Override is set to 480i and you tune to
a 4:3 standard definition channel, the DCT6200 displays graphics overlays on all outputs even if the
YPbPr Output setting is 1080i, 720p, or 480p.
If your DCT6200 is connected to your VCR and you record programming using your VCR, setting
4:3 Override to 480i will cause your VCR to record any graphic overlays (program guides, closed
captions, on-screen menus) that were displayed during the recorded program, regardless of the
YPbPr Output and video output combinations.
The 4:3 Override feature can be configured from the on-screen menu.
Closed Captions
To turn on closed captions:
1
To access the on-screen menu, power on your TV and power off the DCT6200.
2
Press
MENU
on the front panel of the DCT6200. If your TV is on, the on-screen menu is displayed.
The user settings will also be displayed on the front panel LED.
3
Use the
▼
and
▲
arrow keys on the remote control or front panel to highlight
Closed Caption
.
4
Press the
►
arrow key to change Disabled to
Enabled
.
5
Press
POWER
or
MENU
to exit the on-screen menu and save your selection.
Additional options are available for closed captions, including font size, colors, and service selections.
See “User Options” at the back of this manual for more information on these options.
Overlaying graphics such as closed captions are not available on all DCT6200 YPbPr output setting and
video output combinations:
•
If the DCT6200 is set to
1080i
,
720p
, or
480p
YPbPr Output, closed captions are only available on
the high definition video connections (
DVI
and YP
B
P
R
on the rear panel of the DCT6200)
•
If the DCT6200 is set to
1080i
,
720p
, or
480p
YPbPr Output and you are using S-Video, composite
video or RF coaxial (
TO TV
/
VCR
) connections, no closed captions will appear on your screen
•
If the DCT6200 is set to
480i
YPbPr Output, closed captions are available on all video connections
Resetting the User Settings
If you have changed your user settings on the on-screen menu and wish to restore the original settings:
1
To access the on-screen menu, power on your TV and power off the DCT6200.
2
Press
MENU
on the front panel of the DCT6200. If your TV is on, the on-screen menu is displayed.
The user settings will also be displayed on the front panel LED.
3
Use the
▼
arrow key on the remote control or front panel to highlight
Restore Defaults
.
4
Press the
►
arrow key to select.
5
Press
POWER
or
MENU
to exit the on-screen menu. The default settings are restored.
