a`qSOMM=rëÉê=dìáÇÉ
13
CONNECTING YOUR DCT6200 TO AN HDTV AND D-VHS
To record high definition programming, you must have a D-VHS digital VCR and connect to the
IEEE 1394 connector on your DCT6200.
For the connections described below you will need the following cables:
RF (75 ohm)
(supplied)
IEEE 1394
(2)
To connect your DCT6200 to an HDTV and D-VHS digital VCR:
1
Connect an RF coaxial cable to the cable wall outlet and the
CABLE
IN
connector on the DCT6200.
2
Connect an IEEE 1394 cable to the
IEEE 1394
connectors on your DCT6200 and D-VHS digital VCR.
IEEE-1394
IEEE 1394
D-VHS
3
Connect an IEEE 1394 cable to the
IEEE 1394
connectors on your D-VHS digital VCR and HDTV.
The IEEE 1394 is a video
and
audio connection so no audio connections are required if you are using the
IEEE 1394 connection.
On-screen graphics will not be displayed when you are using the IEEE 1394 connection on the rear panel
of the DCT6200.
After you have finished connecting your DCT6200, see “Setting Up Your New DCT6200 for Digital Cable
Services” on page 22.
