a`qSOMM=rëÉê=dìáÇÉ
21
CONNECTING YOUR DCT6200 TO A STANDARD DEFINITION STEREO TV, MONO/STEREO VCR,
AND DVD
If your TV supports multiple sets of video and audio inputs (such as VID1, VID2, etc.), see the
diagram “Connecting a Stereo TV and Stereo VCR” to connect your DCT6200, VCR and TV. When
you have completed those connections, refer to the diagram illustrated here to connect your DVD
to your TV.
For the connections described below you will need the following cables:
RF (75 ohm)
(2: one supplied;
one extra)
Audio
(supplied)
Video
or
S-Video
The cable configuration described here may be used for a mono or stereo VCR, because the VCR audio
and video jacks are not used.
1
Connect an RF coaxial cable to the
TO
TV
/
VCR
connector on the DCT6200 and the
CABLE
/
ANTENNA IN
connector on the VCR.
2
Connect an RF coaxial cable to the
TO TV
connector on the VCR and the
CABLE
/
ANTENNA IN
connector
on the stereo TV.
3
Connect a stereo audio cable to the
INPUT AUDIO RIGHT
and
LEFT
connectors on the stereo TV and the
AUDIO OUT ANALOG R
and
L
connectors on the DVD.
4
Connect a video cable to the
INPUT VIDEO
connector on the stereo TV and the
VIDEO OUT VIDEO
connector on the DVD.
Or
Connect an S-video cable to the
INPUT S
-
VIDEO
connector on the stereo TV and the
VIDEO OUT S
-
VIDEO
connector on the DVD.
This video connection method doesn’t support high definition video. For more information, see
“Connecting your DCT6200 to an HDTV” on page 9.
After you have finished connecting your DCT6200, see “Setting Up Your New DCT6200 for Digital Cable
Services” on page 22.
