Motorola SURFboard SVG1202 User Manual Download Page 30

Page: 30 / 58

SVG1202 Wireless Voice Gateway

•

User Guide

Advanced Pages

Configure IP Filtering, MAC Filtering, Port Filtering, Port Forwarding, Port Triggers, DMZ Host, and
Routing Information Protocol (RIP) Setup.
Click any Advanced submenu option to view or change the advanced configuration information for it.

Advanced Options Page

Set the operating modes for adjusting how the SVG1202 device routes IP traffic.

Field Descriptions for the Advanced Options Page

FIELD

DESCRIPTION

WAN Blocking

Prevents the SVG1202 Configuration Manager or the computers
behind it from being visible to other computers on the SVG1202 WAN.

Select

Enable

to turn on.

IPsec PassThrough

Enables the IPsec Pass-Through protocol to be used through the

SVG1202 Configuration Manager so that a VPN device (or software)
may communicate properly with the WAN.

Select

Enable

to turn on.

PPTP PassThrough

Enables the Point-to-Point Tunneling Protocol (PPTP) Pass-Through

protocol to be used through the SVG1202 Configuration Manager so
that a VPN device (or software) may communicate properly with the

WAN.

Select

Enable

to turn on.

Summary of Contents for SURFboard SVG1202



























































Search results

Summary of Contents for SURFboard SVG1202

Reviews:

Related manuals for SURFboard SVG1202

Brands by name

Popular brands

Motorola SURFboard SVG1202, User Manual

Search results

Summary of Contents for SURFboard SVG1202

Reviews:

Related manuals for SURFboard SVG1202

Brands by name

Popular brands