B
SVG1202 Wireless Voice Gateway
•
User Guide
18
7
Basic Pages
View and configure SVG1202 IP-related configuration data, including Network Configuration, WAN
Connection Type, DHCP, and DDNS in Basic Pages. The Backup option allows you to save a copy of
the SVG1202 configuration on your computer.
Basic Setup Page
Configure the basic features of the SVG1202 gateway related to your service provider’s connection.
Field Descriptions for the Basic Setup Page
FIELD
DESCRIPTION
NAPT mode
NAPT is a special case of NAT, where many IP numbers are hidden behind a
number of addresses. In contrast to the original NAT, however, this does not
mean there can be only that number of connections at a time.
In NAPT mode, an almost arbitrary number of connections are multiplexed using
TCP port information. The number of simultaneous connections is limited by the
number of addresses multiplied by the number of available TCP ports.
LAN
IP Address
MAC Address
Enter the IP address of the SVG1202 on your private LAN.
Media Access Control address — a set of 12 hexadecimal digits assigned during
manufacturing that uniquely identifies the hardware address of the SVG1202
Access Point.
WAN
IP Address
MAC Address
The public WAN IP address of your SVG1202 device, which is either dynamically
or statically assigned by your ISP.
Media Access Control address — a set of 12 hexadecimal digits assigned during
manufacturing that uniquely identifies the hardware address of the SVG1202
Access Point.
