Motorola SURFboard SVG1202 User Manual Download Page 46

Page: 46 / 58

SVG1202 Wireless Voice Gateway

•

User Guide

Wireless 802.11 Advanced Page

Configure data rates and Wi-Fi thresholds.

Field Descriptions for the Wireless 802.11 Advanced Page

FIELD

DESCRIPTION

54g™ Mode

Sets these network modes:

54g Auto

54g Performance

54g LRS

, and

802.11b

only

54g Auto accepts 54g, 802.11g, and 802.11b clients but optimizes
performance based on the type of connected clients. 54g Performance

accepts only 54g clients and provides the highest performance
throughout; nearby 802.11b networks may have degraded performance.

54g LRS interoperates with the widest variety of 54g, 802.11g, and
802.11b clients. 802.11b accepts only 802.11b clients.

Basic Rate Set

Determines which rates are advertised as basic rates. Default uses the
driver defaults.

All

sets all available rates as basic rates.

54g™ Protection

Improves performance in Auto mode using RTS/CTS protection in mixed
802.11g + 802.11b networks. Turn protection off to maximize 802.11g

throughput under most conditions.

XPress™ Technology

Enhances Wi-Fi throughput and efficiency used when there are mixed

wireless networks in the surrounding area from 802.11a/b/g networks.

Afterburner™ Technology

Enhances Wi-Fi 802.11g standard by increasing throughput by 40 percent.

Rate

Forces the transmission rate for the AP to a particular speed. “Auto”

provides best performance in nearly all situations.

Beacon Interval

Sets the beacon interval for the AP. The default is

100

, which is fine for

nearly all applications.

Summary of Contents for SURFboard SVG1202



























































Search results

Summary of Contents for SURFboard SVG1202

Reviews:

Related manuals for SURFboard SVG1202

Brands by name

Popular brands

Motorola SURFboard SVG1202, User Manual

Search results

Summary of Contents for SURFboard SVG1202

Reviews:

Related manuals for SURFboard SVG1202

Brands by name

Popular brands