Motorola P-7131N-FGR, Product Reference Manual

Page: 332 / 700

Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide 7-36
2. Click the Clear Known AP Stats button to reset each of the data collection counters to zero
in order to begin new data collections.
3. Click the Details button to display access point address and radio information.
The Known AP Details screen displays the target AP’s MAC address, IP address, radio
channel, number of associated MUs, packet throughput per second, radio type(s), model,
firmware version, ESS and client bridges currently connected to the AP radio. Use this
information to determine whether this AP provides better MU association support than the
locating access point or warrants consideration as a member of a different mesh network.
4. Click the Ping button to display a screen for verifying the link with a highlighted access
point.
5. Click the Start Flash button to flash the LEDs of other access points detected and displayed
within the Known AP Statistics screen.
Use the Start Flash button to determine the location of the devices displayed within the
Known AP Statistics screen. When an access point is highlighted and the Start Flash button
is selected, the LEDs on the selected access point flash. When the
Stop Flash button is
selected, the LEDs on the selected access point go back to normal operation.
6. Click the Logout button to securely exit the Access Point applet. A prompt displays
confirming the logout before the applet is closed.
MUs The number MUs associated with the located access point.
Unit Name Displays the name assigned to the access point using the System
Settings screen. For information on changing the unit name, see
Configuring System Settings on page 4-2 .
NOTE A ping test initiated from the access point Known AP Statistics screen
uses WNMP pings. Therefore, target devices that are not Motorola access
points are unable to respond to the ping test.