3.5.16
Exiting Emergency Operations
Prerequisites:
Make sure that your radio is engaged in Emergency Operations.
Procedure:
1
If your radio screen displays
Emergency Mic On
, press
End
.
2
Press and hold
Exit
.
NOTICE:
If an Emergency Operation was triggered by Emergency number (not by
E
MERGENCY
button), you can press the E
ND
key to exit the Emergency Operation.
3
If your radio displays
Do you want to exit?
, press
Yes
to exit.
Your radio exits Emergency Operations.
3.6
Repeater Mode
NOTICE:
This is a selling feature.
The Repeater Mode provides repeater connectivity between radios operating in the DMO Mode.
Figure 7: Repeater Mode Operation
DMO
DMO
A DMO repeater is used to extend the DMO range by retransmitting received information from one
radio to another. It retransmits group calls, private calls and data on a given frequency. In the diagram
above the radio in the middle is a repeater.
The repeater sends presence signal periodically on a free channel to allow other radios to synchronize
on a given frequency.
Only the radios on the same talkgroup can communicate with each other through the repeater.
The Repeater Mode is activated by selecting MENU →
Networks
→
Repeater Mode
.
3.6.1
Setting Monitor Option
Procedure:
1
From the home screen, press
Optns
.
MN002041A01–AA
Chapter 3: Modes
74
Summary of Contents for MTP8000Ex Series
